Weighing
Weighing pallet truck: how accurate is it and when do you need one?
Weigh the pallet while you move it: accuracy, scale functions and the one point to check if the weight goes on an invoice.
2 min readAuthor: AIOLOS LIFTS

The short answer
A weighing pallet truck (a pallet truck with a built-in scale) has load sensors in the forks, so you weigh the pallet as you lift it, without taking it to a floor scale. The STAXX WH-25ES lifts up to 2,500 kg (the WH-30ES up to 3,000 kg), weighs with 4 load cells and, according to the 2026 catalogue, has an accuracy of ±0.5‰. If, however, the weight is used for invoicing, you need an approved weighing instrument: ask us before you buy.
At a glance
| WH-25ES | WH-30ES | WH-25SS (stainless steel) | |
|---|---|---|---|
| Lifting capacity | 2,500 kg | 3,000 kg | 2,500 kg |
| Accuracy | ±0.5‰ | ±0.5‰ | ±0.5‰ |
| Weighing | 4 load cells | 4 load cells | 4 load cells |
| Forks (width × length) | 540/680 × 1,150/1,220 mm | 540/680 × 1,150/1,220 mm | 540/680 × 1,150/1,220 mm |
| Minimum fork height | 78 mm | 78 mm | 78 mm |
| Scale battery | 4 Ah lithium (~30 hours of operation) | 4 Ah lithium | 4 Ah lithium |
STAXX WH-25ES catalogue, version 2026.8. Earlier versions state an accuracy of 1‰ and a 6 V/4 Ah battery.
What an accuracy of ±0.5‰ means
The ‰ sign means “per thousand”. An accuracy of ±0.5‰ means a deviation of up to half a thousandth. On loads of 2,000–2,500 kg, that works out at roughly ±1–1.25 kg. For checking loads, stocktaking and avoiding overloaded vehicles, this accuracy is more than enough.
Scale functions
- Tare: deducts the weight of the pallet or packaging.
- Hold: freezes the reading on the display.
- Accumulation: adds up successive weighings, e.g. all the pallets in an order.
- Counting: counts pieces by weight.
- Units: kg or lb.
- Printer (optional): prints the date, time, gross, tare and net weight.
The LED display has 6 digits, 32 mm high, with automatic switch-off to save energy.
When you need one and what to watch out for
It is useful in any warehouse that needs to know the weight before loading: distribution, agricultural produce, recycling, manufacturing. You save the trip to the floor scale and the wait.
Invoicing by weight: under Directive 2014/31/EU, weighing instruments used for commercial transactions must have passed a conformity assessment and carry the corresponding metrology marking. If you will be invoicing based on the reading, let us know so we can check together whether the version covers that use.
For food and chemicals there is the fully stainless steel WH-25SS version. If you want to weigh at working height, there is also the HLS-ES scissor pallet truck with scale.
See them in action
Videos from the manufacturer's (STAXX) official YouTube channel.
Machines in this article
See photos, catalogues and CE certificates for each model.
Frequently asked questions
The STAXX WH-25ES has an accuracy of ±0.5‰ according to the 2026 catalogue, i.e. roughly ±1–1.25 kg on loads of 2,000–2,500 kg.
Only if the instrument is approved for commercial transactions (Directive 2014/31/EU). Ask us before you buy so we can choose the right version.
On the 2026 version of the WH-25ES, the 4 Ah lithium battery gives about 30 hours of operation and charges in about 4 hours.
Sources
Read next

How much can a pallet truck lift? Lifting capacity and load centre
What “2,000 kg at 600 mm” means, why a stacker lifts less up high and how to choose a capacity with a safety margin.
Read more
Galvanised or stainless steel pallet truck for food, cold stores and wet areas?
Humidity, washdown, cold, chemicals: which pallet truck holds up where, and which STAXX models come in galvanised and stainless steel versions.
Read more
Manual vs electric pallet trucks: which pallet truck pays off?
Manual pallet trucks need little maintenance and have no electrical parts, while electric pallet trucks reduce operator strain and injuries.
Read more